How To Use Canon Service Mode Tool Version 1.050 To Reset Your Printer
How to use Canon service mode tool version 1.050 to reset your printer
If you own a Canon printer, you may have encountered the error 5B00, which indicates that the waste ink absorber is full and needs to be replaced. This error prevents you from using your printer until you take it to a Canon service center. However, there is a way to bypass this error and reset your printer using a software called Canon service mode tool version 1.050.
How to use Canon service mode tool version 1.050 to reset your printer
Canon service mode tool version 1.050 is a free software that can be downloaded from various online sources. It allows you to enter the service mode of your printer and perform various operations, such as resetting the waste ink counter, cleaning the printhead, or checking the firmware status. However, this tool is not intended for end users and should be used with caution, as it may damage your printer if used incorrectly.
How to enter service mode on Canon printers
Before you can use Canon service mode tool version 1.050, you need to enter the service mode on your printer. The service mode is a hidden mode that gives you access to advanced settings and functions of your printer. To enter the service mode, follow these steps:
Turn off your printer and disconnect it from the power source.
Press and hold the Stop button on your printer.
While holding the Stop button, press and hold the Power button.
When the Power LED lights up in green, release the Stop button but keep holding the Power button.
While holding the Power button, press the Stop button five times.
Release both buttons. The Power LED should blink green and the LCD screen should be blank.
Your printer is now in service mode.
How to use Canon service mode tool version 1.050
Once you have entered the service mode on your printer, you can use Canon service mode tool version 1.050 to reset your printer. To use this tool, follow these steps:
Connect your printer to your computer using a USB cable.
Download Canon service mode tool version 1.050 from a reliable source and run it on your computer.
Select your printer model from the drop-down menu and click OK.
In the main window of the tool, click on EEPROM Clear.
In the pop-up window, click on Set next to Waste Ink Counter.
A confirmation message will appear. Click OK to proceed.
Your printer will make some noises and print out a report.
Turn off your printer and turn it back on.
Your printer should be reset and ready to use.
Disclaimer
This article is for informational purposes only and does not constitute professional advice. Use Canon service mode tool version 1.050 at your own risk and responsibility. We are not affiliated with Canon or any of its products or services. We are not responsible for any damage or loss caused by using this tool or following this article.
What is the waste ink absorber and why does it need to be replaced?
The waste ink absorber is a sponge-like pad that collects the excess ink that is used during the printing process. It is located at the bottom of your printer and helps to prevent ink from leaking or spilling inside your printer. Over time, the waste ink absorber becomes saturated with ink and needs to be replaced to avoid malfunctioning or damaging your printer.
Normally, when the waste ink absorber is full, your printer will display an error message and stop working until you take it to a Canon service center for replacement. However, this can be costly and inconvenient, especially if you need to use your printer urgently. Thats why some users prefer to use Canon service mode tool version 1.050 to reset their printer and continue using it until they can replace the waste ink absorber.
What are the risks of using Canon service mode tool version 1.050?
While using Canon service mode tool version 1.050 can save you time and money, it also comes with some risks and drawbacks. Here are some of them:
Using Canon service mode tool version 1.050 does not actually replace the waste ink absorber. It only resets the counter that measures how much ink is in the absorber. This means that the waste ink absorber will continue to accumulate ink and may eventually overflow or leak, causing damage to your printer or your surroundings.
Using Canon service mode tool version 1.050 may void your warranty or violate the terms of service of Canon. If you use this tool and encounter any problems with your printer, Canon may not provide you with any support or assistance.
Using Canon service mode tool version 1.050 may not work with all models or versions of Canon printers. Some newer printers have a firmware lock that prevents them from entering service mode or using third-party tools. If you try to use this tool on an incompatible printer, you may end up bricking your printer or making it unusable.
Therefore, before you decide to use Canon service mode tool version 1.050, you should weigh the pros and cons carefully and consider other alternatives, such as buying a new printer or taking your printer to a professional for repair. 04f6b60f66